Fritchii best settings guide

Fritchii (Frizti/Fritchii, currently Fritchii v5.8.4) ships pre-tuned defaults for The Legend of Zelda: Ocarina of Time (0400486024DEC000) on Windows x64, so most settings work without manual edits. Across v5 through v5.8.4, Frizti added dedicated controls for per-game and global NVIDIA DLSS (presets J/K/L/M and quality modes), Ctrl+U high refresh rate (90–165 Hz), AMD & GTX 10 Mesh Shaders compute fallbacks, Castle Town VRAM caps, and one-click save recovery. Every setting below is verified directly against the Frizti/Fritchii release notes on November 17, 2026.

Advertisement

Lichii Emulator Guide / Fritchii best settings

Die photograph of the NVIDIA Tegra X1 chip, its blocks lit in violet, yellow and pink

Start from Fritchii’s built-in profile. Fritchii applies its tuned Ocarina of Time settings automatically (and re-applies core fixes once on major updates). Only adjust the GPU-tier options below; no games, keys or firmware are provided here.

Settings by GPU tier

Match your graphics card and memory capacity to these settings under Emulation > Configure... > Graphics (or per-game via right-click > Properties > Graphics in v5.8.4):

Advertisement
GPU / PC tierUpscaling & AAMesh Shaders & VulkanFrame rate targetMemory & driver notes
NVIDIA RTX 20 / 30 / 40 / 50
(10 GB+ VRAM)
Use NVIDIA DLSS: On; Quality = Quality or Native (DLAA); Preset = K (default); FXAA = OffMesh Shaders: Automatic (native hardware mesh); EDS260 FPS bar toggle, or Ctrl+U (90 / 120 / 144 / 165 Hz in Graphics > Advanced)Automatic NVIDIA driver shader-cache sizing (v5.5); native GPU movie upscaler enabled in Ocarina of Time movies (v5.6)
AMD Radeon RX 6000 / 7000 / 9000Built-in Max Resolution add-on on; FXAA = Off (for AMD FSR 4 & 2x Frame Gen, see CheezyEmu)Mesh Shaders: Automatic or Compute (v5.6 #814 hang fix); EDS2; shader libraries auto-off (v5.3)60 FPS bar toggle (or Ctrl+U if your CPU holds >60 fps)v5.4 converts all 120,461 shaders for AMD Windows drivers; v5.6 clears horizon channels to remove mountain rainbow outlines (#353)
GTX 10-series & RX 5000
(no hardware Mesh Shaders)
1x resolution (untick Max Resolution add-on if GPU-bound); FXAA = OffMesh Shaders: Compute (v5.2 #569 / #642 / #841 compute fallback); EDS230 FPS or 60 FPS toggle next to DOCKEDCompute fallback draws grass, props and geometry that Pascal and RDNA1 GPUs previously skipped
6–8 GB VRAM & 16 GB RAM PCsRTX 8 GB: DLSS Balanced or Performance (Preset K); 8 GB Radeon: 1x resolution, FXAA OffMesh Shaders: Automatic (or Compute on AMD / Pascal)60 FPS (or 30 FPS toggle in heavy hubs)v5.8 keeps DLSS active on 8 GB cards (#941); Castle Town VRAM stays near ~5.5 GB (v5.6); texture cache capped near ~6 GB (v5.7 #1210); keep Windows SSD page file system-managed

Playing on Linux, macOS or SteamOS? See Fritchii & Lichii on Linux & macOS and Steam Deck AppImage vs Proton. For Ocarina of Time audio/shader fixes vs native PC recomp ports, see Zelda: Ocarina of Time settings & PC recomp, plus Fritchii v5 & lichii.exe releases and firmware & keys folder setup.

Per-game and global DLSS

NVIDIA RTX cards replace Ocarina of Time’s heavy internal upscaler with hardware Tensor-core DLSS Super Resolution:

  • Global DLSS quality modes (v5.8, #1249): open Emulation > Configure... > Graphics, enable Use NVIDIA DLSS, and pick from Automatic, Native (DLAA), Quality, Balanced, Performance or Ultra Performance. While playing, the bottom status bar confirms active DLSS and preset (for example DLSS QUALITY K).
  • DLSS presets J / K / L / M (v5.5 & v5.8): Fritchii exposes NVIDIA’s transformer/CNN preset selector (Default, J, K, L, M) and defaults to Preset K. Promoting DLSS to a global toggle in v5.5 also prevented stale per-game config files from silently disabling it.
  • Per-game DLSS overrides (v5.8.4): right-click Ocarina of Time > Properties (Game Settings) > Graphics to set both DLSS Quality and DLSS Preset per title (or leave both on Use global). Whenever a per-game override differs from global settings, Fritchii displays a clear notice banner at the top of the settings window (v5.6).
  • 8 GB RTX VRAM budget fix (v5.8, #941): earlier builds turned DLSS off mid-session when NVIDIA’s driver warned about the 8 GB VRAM budget; v5.8 keeps DLSS running. Pick Balanced or Performance on 8 GB RTX 3060 Ti / 3070 / 4060 cards.
  • Leave FXAA off & movie upscaler on Automatic: v5.6 defaults FXAA to Off so post-process blur does not smear DLSS output, and restores Ocarina of Time’s native movie upscaler on RTX cards (configurable under Graphics > Ocarina of Time movies). If you ever spot faint white trails behind Navi or fireflies at night (a known quirk noted in mainline Lichii build 116), test toggling DLSS off at night.

High refresh rate (Ctrl+U)

Fritchii gives you two ways to scale frame rate without breaking game logic or audio timing:

  • Standard 60 FPS / 30 FPS bar toggle (Frizti v2–v3 & v5.8): click the 60 FPS / 30 FPS button next to DOCKED on the bottom bar. Dark’s Dynamic FPS mod is built in, Frizti v3’s custom frame pacer cuts frame-time spikes from 70–200 ms down to 22–34 ms, v5.5 disabled leftover pre-v5 background frame generation that caused camera flicker, and v5.8 fixed water ripples running too slowly at 60 fps and below (#1180).
  • Experimental 90 / 120 / 144 / 165 Hz mode (Ctrl+U, v5.6–v5.8+):
    1. Open Emulation > Configure... > Graphics > Advanced and choose your high-refresh cap: Monitor refresh rate, 90, 120, 144, or 165.
    2. Start Ocarina of Time and press Ctrl+U at any time (no restart required).
    3. Unlike raw speed-limit disabling in older emulators, Fritchii’s Ctrl+U mode maintains normal 1x game speed, keeps opening cutscenes and the title-screen movie synced to audio (v5.6), keeps water ripples animating above 60 fps (#1152), automatically skips conflicting standalone Dynamic FPS mods (v5.6), and works alongside the Hyrule Cheat Menu mod (v5.7).
  • CPU headroom note: high refresh rate scales with single-core CPU speed. On the developer’s Ryzen 7 7800X3D + RTX 4080 test rig, most areas hold 60+ fps while heavy combat (such as the Hyrule Field Stalchild fight, boosted +5 fps in v5.7 #1028 from 51.9 to 56.9 fps) stays CPU-limited. GPU thread pinning to dedicated CPU cores is built in and enabled automatically (v3 / v5.5).

AMD and GTX 10 Mesh Shaders

Switch 2’s Ocarina of Time remake draws grass, foliage and scene geometry with Ampere mesh shaders, which historically hung AMD Windows drivers and failed to render on pre-Turing NVIDIA cards:

Menu settingWhere to find itRecommended value & what it fixes
Mesh ShadersGraphics > Mesh Shaders (added in v5.6)Automatic (default) or Compute. Routes mesh-shader draws through a compute-shader fallback on AMD GPUs to prevent driver hangs (zortos293/Lichii#814) and enables missing geometry on NVIDIA GTX 10-series / RX 5000 GPUs (v5.2, #569 / #642 / #841). Only pick Native on RTX 20+ cards if testing.
Extended Dynamic StateGraphics > ExtensionsLeave on EDS2. Older troubleshooting guides told AMD users to set Disabled or EDS3, which caused Fritchii’s shader preparation to skip almost every shader; v5.5 reset everyone to EDS2 once after v5.3 fixed the underlying AMD crash.
Vulkan shader libraries (AMD)Automatic on AMD Windows drivers (v5.3)Disabled automatically on Windows AMD Adrenalin drivers in v5.3, stopping Radeon RX 5000 and RX 6000 crashes during shader loading.
Horizon & light-beam fixesBuilt in (v5.6 & v5.7)Clears undefined colour channels so distant mountains on AMD no longer show a rainbow “disco” outline (#353 / Fritchii #29), tracks full compute-shader write ranges to remove giant glowing triangles (v5.6), and fixes stretched/white geometry after area transitions (v5.7 #1199).

VRAM, shaders and save fixes

  • One-time 120,461 shader preparation (v5, v5.4 & v5.8): before your first session, Fritchii compiles all 120,461 Ocarina of Time shaders at full CPU speed (~15 minutes once on an 8-core CPU) on both NVIDIA and AMD (v5.4 converts the 116,373 NVIDIA-recorded shaders for AMD drivers). Area-entry freezes drop from ~0.7 s to 40–70 ms, and v5.8 ensures updates skip rebuilding unless shader translation actually changed. Only click Help > Delete Shader Cache (v5.1) if a broken GPU driver update corrupts visuals.
  • Castle Town VRAM cut from 10–11 GB to ~5.5 GB (v5.6 & v5.7): v5.6 stops thousands of empty GPU submissions per second (+5 fps in Castle Town market, #1161), skips copying 7.5 MB/frame of cleared depth buffers (+2.5 fps), purges replaced render targets so Castle Town VRAM holds around 5.5 GB instead of filling 10–11 GB, returns ~1 GB of zero-cleared guest RAM to Windows, and trims old pipelines on PCs under 24 GB RAM. v5.7 caps GPU texture memory near ~6 GB to stop long-session OOM crashes on 16 GB RAM PCs (#1210). Toggle View > Performance Overlay (v5.6) to watch live FPS, RAM and VRAM.
  • 12GB DRAM (Switch 2) memory layout (v5.8.4): Switch 2 titles always require the 12 GB guest DRAM layout, so Fritchii switches to it automatically while Ocarina of Time runs and restores your setting afterward; v5.8.4 labels the checkbox 12GB DRAM (Switch 2) rather than “Unsafe”.
  • Reset to Defaults & Restore Settings (v5.6): if manual tweaks or imported configs cause stutter, open Settings > General and use Reset to Defaults or Restore Settings to return cleanly to Fritchii’s tuned baseline.
  • Isolated %APPDATA%\fritchii folder & Saves -> Fix button (v5.8 – v5.8.4): Fritchii stores its data in %APPDATA%\fritchii so testing Lichii (%APPDATA%\lichii) or Eden (%APPDATA%\eden) cannot overwrite your settings. Click Saves on the home screen (Help > Saves...) to export/import .zip backups or copy saves in any direction; if earlier copies landed in an orphaned profile (“Orphaned Profiles Detected”), press Fix inside the Saves window (v5.8.4) to back up nand\user\save-backups and move the saves into Fritchii’s own user profile.

Recommended SDL3 controllers

Lichii reads gamepads through SDL3 (including HID command 300 motion). Standard Xbox pads have no gyroscope, so games that use motion aiming or tilt steering (such as Mario Kart World or Ocarina of Time) need a DualSense or aSwitch-style pad, while TMR/Hall sticks prevent drift:

ControllerGyro in Lichii (SDL3)Why pick itAmazon
Sony DualSenseYes (USB-C & Bluetooth)Confirmed working in Mario Kart World (#523); full SDL3 gyro on Windows, macOS & LinuxView on Amazon →
GameSir Cyclone 2Switch mode / PCTMR electromagnetic sticks (no drift) + Hall/micro-switch triggers for PC & Switch 2View on Amazon →
8BitDo Ultimate 2 BluetoothSwitch modeNintendo ABXY layout, TMR sticks and charging dock for Switch 2 & WindowsView on Amazon →
Xbox Wireless ControllerNo gyroPlug-and-play XInput on Windows & Steam Deck (named in upstream Deck notes)View on Amazon →

As an Amazon Associate, this site earns from qualifying purchases. Full button profiles and Linux udev rules: controller setup guide.

Advertisement
A heap of fresh lychees with their pink, bumpy shells, on a white ground
Lychees (Litchi chinensis).

Common questions

What are the best Fritchii settings for NVIDIA RTX GPUs?

Keep Fritchii’s built-in Ocarina of Time defaults, turn Use NVIDIA DLSS on under Emulation > Configure... > Graphics, pick Quality (or Native (DLAA) on RTX 4070 / 4080 / 50-series), leave DLSS Preset on K (default since v5.8), keep FXAA off (default since v5.6), leave Mesh Shaders on Automatic, and use either the status-bar 60 FPS toggle or Ctrl+U (90–165 Hz). In v5.8.4 you can also set DLSS quality and preset per game under Game Settings > Graphics.

How do I get 60 FPS or 90–165 Hz high refresh rate in Fritchii?

For a steady 60 FPS, click the built-in 60 FPS / 30 FPS toggle next to DOCKED on the bottom bar (bundled with Dark’s Dynamic FPS since Frizti v3, with water ripple speed fixed at 60 FPS and below in v5.8, #1180). To run above 60 FPS on a high-refresh monitor, open Emulation > Configure... > Graphics > Advanced to pick your cap (monitor rate, 90, 120, 144 or 165), then press Ctrl+U during gameplay (added in v5.6) – the game runs at normal speed without fast-forwarding, keeps cutscene audio synced, and animates water ripples above 60 FPS (#1152).

Which Mesh Shaders setting should I pick on AMD Radeon or GTX 10-series cards?

Leave Graphics > Mesh Shaders on Automatic, or force Compute if you hit driver hangs. Fritchii v5.2 added the compute fallback (#569, #642, #841) so older GPUs without mesh shaders (such as GTX 1060 / 1070 / 1080 Ti and Radeon RX 5000) draw missing geometry properly, and v5.6 routes AMD Radeon mesh-shader draws through compute (#814) to stop GPU driver timeouts. Also leave Extended Dynamic State on EDS2 (restored in v5.5).

Why does Fritchii spend ~15 minutes Preparing shaders on first launch?

Fritchii v5 compiles all 120,461 Ocarina of Time shaders upfront before gameplay (and v5.4 converts all 116,373 NVIDIA-recorded shaders so AMD GPUs get the full build too). That one-time ~15-minute build on an 8-core CPU cuts new-area traversal hitches from ~0.7 seconds down to 40–70 ms. Starting in v5.8, updating Fritchii does not trigger Preparing shaders again unless shader translation changed.

How do I prevent VRAM pile-ups or 16 GB RAM crashes in Castle Town?

Update to Fritchii v5.8.4: v5.6 eliminated empty GPU submissions and leaked render targets so Castle Town VRAM stays near ~5.5 GB instead of climbing to 10–11 GB (+7.5 fps), v5.7 capped texture memory around ~6 GB to stop 16 GB RAM out-of-memory crashes (#1210), v5.8 keeps DLSS active on 8 GB RTX cards (#941), and v5.8.4 automatically enables the 12GB DRAM (Switch 2) layout while Ocarina of Time runs. On 16 GB RAM Windows PCs, also leave the SSD page file on system-managed (or 32 GB).

How do I reset broken settings or recover missing saves (“Orphaned Profiles”)?

To undo bad config tweaks, open Settings > General and click Reset to Defaults or Restore Settings (v5.6). If saves copied from Eden or Lichii 150+ do not appear or show “Orphaned Profiles Detected”, click Saves on the home screen (Help > Saves...) and press the Fix button (v5.8.4) – Fritchii backs up nand\user\save-backups first and moves your saves into Fritchii’s active user profile.